PARTS RESTOCK ESTIMATED 4/20

CBR-101 CHAMBER SEPARATOR

$ 15.00

Gene Cafe chamber separator. Complete assembly includes separator, swing arm, swing blades, and blade cushion.  

Please be be careful and always wear gloves when removing and replacing the chamber separator.

  

Customer Reviews

Based on 21 reviews
100%
(21)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Stephen Nagy
If a split ring fails, try this!

After ten years of use one of the rings that suspends the chaff sweep/swing blade wore through, and replacement Chamber Separators were back-ordered. My local hardware store had no split rings small-enough to make the fix. Then I remembered that I had some Danielson #3 stainless split rings with fishing tackle. These were slightly larger than the original split rings at 5mm inner diameter and 6 mm outer diameter, but are fine and were less-difficult to install than smaller rings. It certainly seemed hazardous to use the roaster with only one ring: thwack! On the glass! Tip: pull out the chamber separator for easier access, separate the end of the ring from the rest of the coiled ring with a pin, then slowly work the ring onto the blade arm, then repeat, attaching it to the swing blade with needle-nose pliers. Perfect! I replaced both rings and have eight more that can be used in the future.

P
Phillip Wallace
OEM Part. Install was flawless

No issues with installation and now back to roasting.

J
Joel Bailey
Part Chamber Seperator

Not much to report. The replacement is exactly the same as the original part. The replacement procedure is simple. It just works.

G
Gunnar Heidar
Great service

Always great service from Gene Cafe! I thought I would have to buy a new chamber for $70, but they suggested I just replace the chamber separator which was $15. Very happy customer.

J
John Ellsworth
Chamber seperator

Easy to install. Works great.

Customer Reviews

Based on 21 reviews
100%
(21)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Stephen Nagy
If a split ring fails, try this!

After ten years of use one of the rings that suspends the chaff sweep/swing blade wore through, and replacement Chamber Separators were back-ordered. My local hardware store had no split rings small-enough to make the fix. Then I remembered that I had some Danielson #3 stainless split rings with fishing tackle. These were slightly larger than the original split rings at 5mm inner diameter and 6 mm outer diameter, but are fine and were less-difficult to install than smaller rings. It certainly seemed hazardous to use the roaster with only one ring: thwack! On the glass! Tip: pull out the chamber separator for easier access, separate the end of the ring from the rest of the coiled ring with a pin, then slowly work the ring onto the blade arm, then repeat, attaching it to the swing blade with needle-nose pliers. Perfect! I replaced both rings and have eight more that can be used in the future.

P
Phillip Wallace
OEM Part. Install was flawless

No issues with installation and now back to roasting.

J
Joel Bailey
Part Chamber Seperator

Not much to report. The replacement is exactly the same as the original part. The replacement procedure is simple. It just works.

G
Gunnar Heidar
Great service

Always great service from Gene Cafe! I thought I would have to buy a new chamber for $70, but they suggested I just replace the chamber separator which was $15. Very happy customer.

J
John Ellsworth
Chamber seperator

Easy to install. Works great.

Join our Mailing List

Sign up to receive emails about news, deals, and events. Get 10% off your first purchase!

x